Maine Home Garden News — August, 2010


August is the month to . . .

By Amy Witt, Horticulturist, UMaine Extension Cumberland County, amy.witt@maine.edu

  • Monitor the trees in your area for signs of two invasive tree insect pests: the Asian longhorn beetle (ALB) and hemlock woolly adelgid (HWA).
    • ALB is a woodboring beetle native to Asia. It attacks and eventually kills healthy hardwood trees including maple, birch, poplar, willow, horsechestnut, elm, and ash. For more information on the ALB, visit the Maine Department of Agriculture’s Web page.
    • Hemlock Woolly Adelgid; photo by J. F. Dill
      Hemlock Woolly Adelgid; photo by J. F. Dill

      HWA is a serious pest of eastern hemlock and can kill a tree within a few years of being infested. For more information, see the Maine Department of Conservation’s HWA overview.

    • Report any suspicious findings to Allison Kanoti of the Maine Forest Service, allison.m.kanoti@maine.gov or (207) 287-3147.
  • Mid-August through mid-September is a good time to seed a new lawn. For more lawn tips, see Bulletin #2367, Establishing a Home Lawn.
  • Plant or divide (three to four weeks after bloom) bearded iris. To divide, dig the plant up, make sure each division has one or more 2- to 6-inch sections with leaves and healthy white roots. Remove and discard the old center rhizomes and anything that may have rotted or been attacked by pests.
  • Order your spring flowering bulbs. Always purchase bulbs from a reliable grower/source and make sure they are healthy, plump, firm and as fresh as possible. There are a large variety of bulbs to choose from, so be daring and try something new this year.
  • Review your landscape. Research and select trees and other ornamentals for fall planting.
  • Plant broccoli, cauliflower, and cabbage seedlings, and lettuce, spinach and turnip seeds for a fall crop.
  • Pick summer squash and zucchini every day or two to keep the plants producing. See Bulletin #4257, Zucchini and Summer Squash, for recipe ideas.
  • Collect mature or ripened seeds from your vegetable and flower gardens to save and plant next year. Keep in mind that the seed from hybrid plants is often sterile or does not reproduce true to the parent plant.
  • Begin harvesting onions when 1/2 to 3/4 of the leaves have died back. Pull the onions in the morning and allow the bulbs to dry in the garden until late afternoon. Put the onions in a dry, protected and shady location to prevent them from getting sunburned on hot, sunny days.  Place bulbs under dry shelter on elevated slats or screens, or hang them in small bunches, before the evening dew falls. Complete drying and curing will take 2 -3 weeks.  After the bulbs dry, cut the tops 1 1/2 to 2 inches long, and place the bulb in cool, dry storage with good air circulation.
  • Gather herbs for drying as they mature; pinch the stems of basil regularly to prevent flowering.
  • Find a pick-your-own blueberry operation near you.
  • Pay attention to your garden’s water needs. Consider soaker hoses and drip irrigation for efficiency.

Recognizing and Managing Invasive Plants: Asiatic Bittersweet

By Dr. Lois Berg Stack, Extension Specialist, Ornamental Horticulture, Univ. of Maine; Dr. Mary Rumpho, Professor of Biochemistry and Molecular Biology, Univ. of Maine; and Dr. Donglin Zhang, Associate Professor of Horticulture, Univ. of Maine. For more information, contact lois.stack@maine.edu.

Asiatic bittersweet (Celastrus orbiculatus; also called Oriental bittersweet) was introduced to the United States in the late 1800s for ornamental purposes: it was long planted as a decorative vine in landscapes, and it has also been used in crafts such as wreathmaking and floral design. It has become a difficult weed in many home landscapes, and has become widely established in the eastern U.S. and Canada, where it is a serious invasive plant in natural areas (see photo of bittersweet on Mackworth Island, Maine).

What does it look like?

Asiatic bittersweet growing over treesAsiatic bittersweet berries

Photos by Lois Berg Stack

This vine grows to 30’ and longer. It climbs by twining its stem around supports such as trees. The stems have light brown bark covered with bumpy lenticels. The leaves, 3-5” long, are arranged alternately on the stems, and are oval to nearly round, with a pointed tip. The root surfaces are bright orange. This plant is dioecious; that is, male flowers and female flowers develop on separate plants. Only the female plants produce clusters of colorful yellow fruits that split open in fall to reveal orange-scarlet seeds (see photo of immature fruits that have not yet split open).

There is a native species of bittersweet, American bittersweet, but the two can easily be differentiated by comparing two features. First, the leaves of American bittersweet are narrower, more “oval” than “round.” And second, the fruits of American bittersweet are located in clusters only at the tips of stems, while the fruits of Asiatic bittersweet are located on side branches all along the vining main stem. This feature explains why Asiatic bittersweet was introduced, as it is more colorful when in fruit.

What kinds of sites does Asiatic bittersweet invade?

Asiatic bittersweet grows at the edges of forests, in open woodlands, and in fields and hedgerows. It grows most vigorously in full sun, but tolerates shade and invades forested areas. In those shaded sites, if a tree is cut or falls in a storm, the increased light often causes the existing small bittersweet seedlings to grow rapidly and climb up trees around the opening. Asiatic bittersweet readily invades sites with slightly acidic and moderately moist soils. It tolerates a wide range of temperatures, and is invasive from eastern Canada south to Georgia, west to Arkansas and north to Wisconsin.

How does it invade new sites?

Female Asiatic bittersweet vines produce large numbers of seeds. Although lab studies have shown that they do not remain viable much longer than one year, the seed bank in the soil is quickly replenished each year by annual crops of seed. Birds disperse seeds to new sites, often flying from an infested site to a wooded nesting area and dropping seed there. People are part of the picture, too, when they purchase wreaths or arrangements made from Asiatic bittersweet and discard those items in places where birds can eat the seeds and later disperse them.

Once established in a site, the plants often spread by root suckering. In landscape settings, for example, if Asiatic bittersweet is planted in a bed, and the bed is edged with a sharp tool, the severed roots beyond the bed often send up new shoots.

What impact does this plant have on native species?

Asiatic bittersweet is outcompeting its American counterpart in two ways. First, it is more competitive, and is displacing the American species. Second, it hybridizes (naturally) with its American counterpart.

When an opening in wooded sites allows this plant to grow rapidly, its shade restricts the growth of native understory shrubs and groundcovers. Bittersweet stems can, over time, restrict flow of sap in the trees which it entwines. As the vines increase in size and weight, the trees under them are more susceptible to damage from wind, snow and ice.

How can I control Asiatic bittersweet?

No single method controls this plant. By combining the following methods, you can manage it:

  1. Do not purchase or plant this species. Scout your neighborhood; you might be able to organize a neighborhood management effort of prevention and management. Because birds carry seeds from one site to another, this is not a single-landowner problem; it’s a community problem.
  2. Learn to recognize the plant as a young seedling. Its stems are limber, and “reach” for something to climb on. When the stems are young, they are green. The roundish leaves with a pointed tip are easily to recognize. Small patches of young seedlings can be hand-pulled. By removing young vines before they reach maturity, you can prevent future seed crops. Watch for the seedlings as you weed your garden, especially in places where you know birds rest or nest.
  3. Mowing or cutting back to the ground does not kill Asiatic bittersweet, because it readily produces shoots from the stumps. However, cutting the tops off female plants in early summer can at least prevent seeds from maturing. If you cut the base of vines that have vined up into trees for a long time, avoid pulling the vines down from the tree branches, as the branch bark will be damaged, leaving the tree more vulnerable to other problems.
  4. Several herbicides are labeled to control this plant. E-mail lois.stack@maine.edu for specific recommendations.

If I remove this plant from my landscape, what can I plant in its place?

Many vines are available at garden centers and nurseries. Native American bittersweet (Celastrus scandens), native riverbank grape (Vitis riparia) and native trumpet honeysuckle (Lonicera sempervirens) are all sold by some nurseries. For possible vendors in Maine, check Bulletin #2502, Native Plants: A Maine Source List. For smaller vines in more refined landscapes, consider clematis hybrids.

Where can I find more information about this plant?

Check our fact sheet Asiatic Bittersweet or call your local Extension for print copy.


Consider Drip Irrigation for Your Garden

By Kate Garland, Horticulture Aide, Penobscot County, Katherine.garland@maine.edu and Stephanie Burnett, Assistant Professor of Horticulture, University of Maine, Orono, sburnett@maine.edu

Drip irrigation, sometimes referred to as micro-irrigation, delivers small amounts of water under low pressure to plants through a network of strategically placed tubing.  This approach to watering has many benefits and is appropriate for all types of gardens including:  containers, vegetable & ornamental beds, raised beds, and even hanging baskets.  An increasing number of local retailers offer the basic equipment to put together a home system, and there are numerous on-line retailers that sell the materials as well.

Why install a drip irrigation system in Maine?

  • TIME: Busy lives and other garden duties should come before watering. Why spend time watering when you can be weeding, harvesting, or admiring your garden? Many gardeners go on vacation during periods of peak water demand. With a timer, drip irrigation can eliminate the worry and potential risk of leaving a garden unattended during hot summer months.
  • ACCURACY: These systems ensure that water reaches the roots and doesn’t run off the soil surface or evaporate into hot air. For this reason, drip irrigation is especially useful in beds that are located on a slope. Also, directing water to specific plants means you aren’t watering as many weeds.
  • DISEASE PREVENTION: Drip irrigation reduces the amount of water coming in contact with leaves. Plant diseases are less prevalent and easier to manage when foliage remains dry. Targeted irrigation at the base of the plant also reduces the amount of fungicides and pesticides washed off the plants.
  • MONEY: Gardening is almost never free.  Many people spend hundreds, even thousands of dollars on plant material without considering how to consistently supply the water necessary to survive the crucial establishment period.  Consider drip irrigation an insurance policy for the investment that you have made in your landscape.  The low flow nature of drip irrigation also reduces nutrient leaching thus reducing fertilizer costs.
  • ENVIRONMENTAL HEALTH: Runoff from excessive watering practices can carry harmful nutrients and pesticide residues into local waterways. Phosphorous and nitrate, in particular, can harm aquatic ecosystems with high levels leading to algal blooms and reduced oxygen for aquatic animals. Drip irrigation minimizes runoff and protects waterways.

Materials commonly used in drip irrigation

Note: Starting at the water source, these items are listed in the order in which they are normally located within the system.

Timer: Although not essential, most drip irrigation systems have a timer.  If a timer is used, it is helpful to install a Y-connector at the water source so that a separate hose can bypass the timer when necessary.

Filter: A filter is a good idea for any water source, but is especially important when the water source is a well or pond. Filters remove small particles, such as soil, in the water to prevent emitters from clogging.

Pressure reducer: Water pressure varies from place to place and is often quite high, which results in blown out lines. A pressure reducer rated to approximately 40 pounds per inch2 (psi) will protect your irrigation system from the damaging effects of high water pressure. Be sure to check the irrigation emitters to determine what range of water pressures they will tolerate.

Irrigation tubing: Gardeners have three main options for irrigation tubing.  The simplest form is a soaker hose:  a porous-walled garden hose that allows water to slowly seep into soils. Another option is drip tape:  a thin-walled plastic tubing that has holes at pre-set intervals. Thick-walled plastic tubing is the third option. In this case, the installer decides where the holes should be. High quality thick walled tubing is recommended for long-term applications.

Fittings and valves: These are mainly used with thick-walled plastic irrigation tubing, but may be used with soaker hoses or drip tape as well.  These include “L” and “T” shaped connectors that direct the tubing around corners and in diverging directions.  Used in conjunction with shut-off valves, these can be used to establish different irrigation zones within the garden.  If an area isn’t planted, the valve can be closed off to minimize water use.

Emitters: When using thick walled irrigation tubing, holes are punched into the tubing and small, barbed emitters can be inserted into the holes.  Different emitter types have different output rates. Smaller sized tubing can be connected to emitters to apply water to areas further away from the main line. Some choose to not use emitters, simply letting the water to flow out of the tubing holes.

Goof plugs: These handy items plug holes in the irrigation line that are not in a desirable location. Goof plugs save you from being stuck with emitters in the wrong location and from replacing a whole irrigation line.

Even though Maine has relatively high annual rainfall totals, precipitation throughout the growing season can be unreliable and is often insufficient for optimal plant growth. A consistent water supply throughout the entire growing season is essential for producing high quality, high yielding plants.  Drip irrigation is an efficient solution meeting your garden’s water needs.

For more information:

Hutchinson, M.  Trickle Irrigation:  Using and Conserving Water in the Home Garden. University of Maine Cooperative Extension Bulletin 2160.  https://extension.umaine.edu/publications/2160e/

Broner, I. Drip Irrigation for Home Gardens. Colorado State University Cooperative Extension publication 4.702 (1998).  http://www.ext.colostate.edu/pubs/garden/04702.html

Parsons, J., S. Cotner, R. Roberts, C. Finch, D. Welsh, and L. Stein.  Efficient Use of Water in the Garden and Landscape. Texas A&M Extension.  http://aggie-horticulture.tamu.edu/extension/homelandscape/water/water.html


University of Maine Cooperative Extension’s Maine Home Garden News is designed to equip home gardeners with practical, timely information.

Let us know if you would like to be notified when new issues are posted. To receive e-mail notifications fill out our online form.

Maine Home Garden News was created in response to a continued increase in requests for information on gardening and includes timely and seasonal tips, as well as research-based articles on all aspects of gardening. Articles are written by UMaine Extension specialists, educators, and horticulture professionals, as well as Master Gardener Volunteers from around the state, with Professor Richard Brzozowski serving as editor.