Masoud Hashemi (UMass)
Richard Kersbergen (UMaine)
Kate Parson (NRCS-Amherst)
Samantha Glaze-Corcoran (UMass, PhD Candidate)
In New England, farmers generally rely on tillage to create a warm, dry, and weed-free seedbed. However, tillage makes the soil susceptible to erosion, and contributes to soil compaction, especially when the soil is wet and not well dried. Intensive tillage, lack of surface cover, and insufficient crop residue has played a significant role in soil degradation. In recent years, research by Extension and universities, as well as soil health campaigns by NRCS, have raised awareness and expanded farmer demand for more information pertaining to cover cropping and no-till systems.
Benefits of no-till with cover crop systems include:
- Minimized soil degradation, including erosion, crusting, and
- Water conservation from reduced soil evaporation due to residue on the soil surface, elimination of tillage practices that dry the soil, and more water stored in the soil due to increased organic matter levels, culminating in improved crop tolerance to
- Increased soil organic matter as well as improved soil structure that will improve water
- Reduced cost of operation – reports average $50 per acre savings in fuel and labor
- Earlier plantings of corn following winter grain cover crop, which increases the likelihood of harvesting first cut hay, haylage, or baleage at peak nutritional
- Improved opportunity to graze or harvest cover crops as emergency feed without significant delays in planting
- Enhanced natural soil fertility due to improvements in soil
- Less rocks to pick and more opportunity for efficient crop
- Protected soil from high summer temperatures and heavy
Farmers are increasingly adopting no-till management in their cropping systems, and the number of those considering a transition to no-till is fast growing. However, the transition from conventional to no-till may present some challenges. There are several concerns that farmers need addressed before making their final decision:
Q: Is there a crop yield penalty in either the short or long term?
A: UVM Research has shown a slight yield drag when transitioning continuous corn fields to no-till while the soil improves from the cover crop and the reduced soil disturbance. Some dairy farmers in the North- east however have not seen a reduction in yield. UVM research, along with countless farmer experiences, does not show a yield drag when starting no-till corn into hay fields that are terminated in the previous fall with a herbicide. This technique is also a great way to start a crop rotation in fields that have not traditionally been used for corn silage production.
In fact, with extreme changes in weather conditions, including longer period of no or little rain, it is expected that corn grown in no-till system will perform better than those planted conventionally.
Q: Should changes be made to fertility management?
A: The short answer is yes. The following list includes tips and considerations for fertility management in no-till systems:
- Soil pH can be more difficult to The transition to no-till will be best if the soil pH is already in a desirable range.
- Nutrients applied to the soil surface, including lime, may become concentrated in the top Soil testing of the top two inches of soil, as well as the standard six inch depth, may be useful to identify a build-up. If the nutrient concentration test results from the six- inch deep sample are optimum or high, then nutrient accumulation near the soil surface should not be a concern. If the six inch results indicate low or very low nutrient concentrations and/or the two inch depth indicates high concentrations, then injecting phosphorus and potash with the planter or a separate fertilizer injector is recommended.
- Manure cannot be incorporated into soil; if injection is not an option, ammonia nitrogen (potentially up to 50% of the total nitrogen in liquid manure) may be lost to the atmos However, many researchers and farmers believe the benefits of no-till and the use of nitrogen conserving cover crops outweigh the potential nitrogen loss.
- Cover crops capture nitrogen from manure and residual nitrogen from the previous season, thus helping to reduce nitrogen inputs to subsequently planted Even so, most no- till experts recommend applying 30-50 pounds of N per acre as a starter. This would be especially necessary if rye or other winter grain cover crops were terminated at a more mature stage.
Q: Do no-till systems require changes in corn hybrid selection?
A: No specific corn hybrid has been developed to perform better in no-till system. However, two of the integral parts of no-till corn are weed control and cover crops. Cover crops should be an essential part of no-till corn system. Figure 1 clearly illustrates that no-till systems with cover crops provide much more benefit than adopting no-till management without including cover crops in the rotation. To facilitate cover crop establishment, shorter-season corn hybrids should be selected as they will mature in time to get an effective cover crop established by mid-September.
Earlier maturity hybrids do not necessarily mean lower yields. UMaine, UMass, and UVM corn hybrid trial data has indicated that shorter-season corn does not suffer a significant yield penalty. Proper short-season hybrids can be selected based on their yield and quality performance from annual trials that are published by the above three states.
Figure 1: The influence of various farming practices on soil organic carbon
Q: What is it about cover crops that make them so important for no-till to be successful?
A: Cover crop roots break up compaction and create pores that are used by the following corn crop’s roots. Soil microbes that feed on carbon exuded from the roots, as well as the roots themselves after cover crop termination, produce sticky substances that bind soil particles together into aggregates. Aggregates are the key to allowing your no-till soil to breathe, infiltrate water and withstand heavy equipment. Some farmers have equated cover crops to “driving on geotextile fabric”. The soil microbes are as important as the rumen microbes in a dairy cow.
Q: How different would be weed management compared to conventional corn system?
A: In general, surface-applied pre-plant or pre-emergence herbicides are recommended to control early- emerging weeds, even if glyphosate-tolerant corn hybrids are used. Many no-tillers include the residual herbicide with the cover crop burndown. In general, annual weed pressure is reduced due to the heavy cover crop residue and limited soil disturbance.
Q: Does transitioning to no-till system reduce costs?
A: There are some initial costs to consider when transitioning to a no-till corn system. Some growers have modified their existing planters, while others have purchased new no-till planters. Both can be effective, but the key will still be to get the right seed placement. Some guidelines can be found on some You Tube videos from Vermont:
Some key components are row cleaners, and/or wave coulter in front, proper packing wheels, seed firmer, and closing wheels. Additionally, the double disk openers may need to be replaced more frequently. There are cost savings in reduced plowing and harrowing. Using 2016 Pennsylvania custom rates, producers would save about $35 in acre by simply eliminating plowing and harrowing. In recent studies in Maine and Vermont, producers indicated a cost savings of $50 per acre in fuel and labor.
Adjustments you may want to make for transitioning into no-till:
- The easiest and most successful entry point into no-till corn production is to start with killing a sod crop in the fall and planting into the killed sod crop in the This technique is also a great way to start a crop rotation in fields that have not traditionally been used for corn silage production.
- Get your cover crop planted! Experienced no-tillers recommend cutting small grain rates back to 80-100 per acre, particularly when they can get the cover crop sown early in the fall (Before September 15) and they plan to allow the cover crop to get tall in the spring and do not plan to harvest it. This reduces the volume of material that the planter needs to get through.
- One concern when planting into a cover crop (killed or green) or into a dead sod is seeing your row markers! Some producers use foam markers to make it easier to see where their next pass will Others have purchased GPS monitors.
- Since the potential exists for a more variable seed placement, you may want to increase your seeding rate by about 10% to ensure a projected Keep your corn planter in excellent working condition and adjusted properly and plan to plant slower than you typically do. Make sure to get off the planter and check seed depth, especially when moving to fields with different soil types.
- By choosing shorter- season corn varieties, you are improving your odds of harvesting your crop when weather conditions are favorable, and you will not cause as much compaction or make as many ruts with trucks, tractors and For more Northern states, the earlier harvest will also reduce the risk of running into adverse wet weather conditions at harvest. Think about driving patterns for trucks entering the field to reduce the potential for problems in the future.
- Scout your fields! We have seen the potential for armyworm damage in no-till corn after a winter grain cover Armyworm moths may be attracted to lay their eggs on the cover crop in early spring, and then the larvae will be ready and waiting for the corn! We have also seen the potential for increased slug and snail damage when there is a lot of residual organic matter on the soil surface.
- 7) Don’t rely on a single application of herbicide for weed While many times, the killing of the cover crop may provide you with adequate weed control, we always recommend monitoring fields for weed populations. You may want to spray with some pre-emergence products or come back later with some post emergence products. Just be aware that certain weeds are difficult to control post-emergence (ex. crabgrass) while others are best-controlled post emergence (ex. field bindweed).
Other resources for reduced tillage and cover crops are available at: