Bulletin #2330, Maine Farm Safety Program: Care of Respirators

Print Friendly, PDF & Email
farm

Bulletin #2330, Maine Farm Safety Program: Care of Respirators (PDF)

By Dawna L. Cyr, Farm Safety Project Assistant, and Steven B. Johnson, Ph.D., Extension Crops Specialist

For information about UMaine Extension programs and resources, visit extension.umaine.edu.
Find more of our publications and books at extension.umaine.edu/publications/.

When cared for and cleaned properly, respirators should work for years without problems. Proper maintenance and testing are a must.

Inspection

Before each use, make sure you have the right respirator for the job, and inspect it for wear and damage.

  1. Check for worn or frayed straps.
  2. Look for wear or damage on the seal of the face piece.
  3. Be sure all the screws are tight.
  4. Check rubber and plastic parts for flexibility.
  5. Valves should be clean and seated perfectly.
  6. Be sure filters and cartridges are the right kinds for the atmosphere in which you will be working. Remember the color code for cartridges and filters is only a guide. Always read the label to be sure you have the right kinds of elements. If a combination of elements is required, be sure you have the right combination on each side of the respirator.
  7. If it is a full-face respirator, the face shield should be clear and in good condition.
  8. For airline and self-contained breathing apparatus (SCBA) respirators, check the air supply and warning alarm.
  • Make sure they are in good working order and the face seals seat properly.
  • Clean and dry all parts of the respirator regularly.

Initial Use of Respirators

The first time you ever use a respirator, try it out in a nonhazardous atmosphere to get accustomed to how it feels. You may need to adjust to some of the following problems:

  1. Normal body movements may be more awkward than usual. Some respirators are bulky and heavy.
  2. A full-face respirator, or one that covers your entire head, will affect your vision and hearing.
  3. Respirators that are not equipped with a speech transmission device or a microphone may reduce the clarity of loudness of your voice.
  4. Breathing is likely to require more effort than normal.

Cleaning and Sanitizing Respirators

If you are responsible for cleaning your own respirator, remove and clean filters, cartridges, valve assemblies, and any other detachable parts. As you clean and dry each part of the respirator, inspect it carefully to be sure it is good condition. Check for:

  1. Cracks in the face shield.
  2. Worn straps, hoses, nose clips.
  3. Wear or damage to the face piece seal.
  4. Condition of filters, cartridges or canisters.
  5. Worn or damaged screw threads.
  6. Poor seating of exhalation and inhalation valve disks.
  7. Damage to the speaking diaphragm, if there is one.

Make sure flexible parts are still flexible and check the stretch of elastic bands. Follow the manufacturer’s instructions for cleaning and disinfecting the respirator. Generally, a mild detergent and a soft brush are used for cleaning. Rinse the respirator thoroughly in clean, warm water. Rinsing is extremely important because a residue of the cleaning agent can damage the respirator and irritate the skin. Be sure all parts are thoroughly dry before putting the respirator back together again. Use a soft, lint-free cloth to absorb most of the water and a fan to speed up the drying process.

Recognizing an Emergency

If your respirator has an indicator or alarm, be sure it is operating properly. In addition, be alert for the following danger signals. If any of them occur, get to fresh air immediately.

  1. Breathing becomes more difficult. Your filter or cartridge may be clogged.
  2. You detect any odor, taste, or irritation that might indicate the contaminant is getting inside your respirator.
  3. The respirator becomes severely uncomfortable.
  4. You experience symptoms of illness, such as dizziness, nausea, weakness, coughing or shortness of breath.

Leave the area immediately if any of these problems develop. Check the respirator for damage, and make sure the filters and cartridges are not clogged or not filtering properly.

Storage

When storing a respirator, even overnight, first flex the rubber parts to make sure they are not twisted or bent. Then seal the respirator in a plastic bag and store it where it will be protected. Protect the respirator from dust, sunlight, extreme heat and cold, moisture, damaging chemicals and physical damage.

This Maine Farm Safety fact sheet is part of an educational fact sheet series produced by University of Maine Cooperative Extension. For more information on farm safety, contact your UMaine Extension County Office.

Information in this publication is provided purely for educational purposes. No responsibility is assumed for any problems associated with the use of products or services mentioned. No endorsement of products or companies is intended, nor is criticism of unnamed products or companies implied.

© 2002, updated 2020

Call 800.287.0274 (in Maine), or 207.581.3188, for information on publications and program offerings from University of Maine Cooperative Extension, or visit extension.umaine.edu.

In complying with the letter and spirit of applicable laws and pursuing its own goals of diversity, the University of Maine System does not discriminate on the grounds of race, color, religion, sex, sexual orientation, transgender status, gender, gender identity or expression, ethnicity, national origin, citizenship status, familial status, ancestry, age, disability physical or mental, genetic information, or veterans or military status in employment, education, and all other programs and activities. The University provides reasonable accommodations to qualified individuals with disabilities upon request. The following person has been designated to handle inquiries regarding non-discrimination policies: Director of Institutional Equity and Title IX Services, 5713 Chadbourne Hall, Room 412, University of Maine, Orono, ME 04469-5713, 207.581.1226, TTY 711 (Maine Relay System).